Spirited is a basically new design intended EXCLUSIVELY for the professional riders of high training level.

Zest of the new design is a partial replacement of the woodcore by special composite material in conjunction with Kevlar and Vectran which are fivefold stronger than steel. This particular replacement gives the board increased flexibility and much more power while two layers of Titanal and some layers of specific rubber provide it with a smooth ride.

The increased torsional Stiffness of Spirited undoubtedly influences the accuracy of reference of the Turn and the level of energy transmitted by a rider.

Spirited is stable in difficult slope conditions and steadily holds the edge even on broken slopes or ice and at a high speed.

The degree of flex of Spirited construction Snowboards is always hard or higher.

Don’t try to flax the board with the help of your legs! Snowboard speed control is achieved by speed and tilt angle.

Price: €1100

Please bear in mind that there is no warranty for the insert blocks of the “Freecarve” snowboard line with titanal construction (Titanal ‚ World Cup & Spirited).

There is no strong strengthening of the insert blocks in the correct titanal design. That is why when your feet work on a hard fastening (catek, bomber) and your feet are large you can easily pull out the insert blocks.

So, if you want to be careful not to pull out the insert blocks you are strongly recommended choosing an option “Additional carbon strengthening of the titanal constructions”. The price for this kind of strengthening is €100 in addition to the price of the board. Then your warranty will cover in full the insert blocks.

SL & GS boards are used together with plates which means that strengthening of the inserts is not necessary: boots are fastened to the plate that lies on the board and evenly distributes all the load.

Stiffness

The degree of flex of Spirited construction Snowboards is always hard or higher.

Edge bevel angles

The base edge bevel angle is 0° and side edge bevel angle is 2° (88°) for freecarve snowboards.

Base

Special W, F, M bases.

Topsheet options

Customary snowboard topsheet is white with OES logo. We propose as an option to change the topsheet to a single color sliding base that will be twice stronger and thicker than the ordinary one. The color range is the following:

The colored sliding base for the topsheet — €50

Below is the photo of the finished topsheet:

It is possible to print your own picture.

Custom design of topsheet — €150.

Besides, we can adapt any graphic design from our library for the model you’ve chosen.

Adapted design from our library — €50.

Colored base — €100

Carbon under transparent topsheet — €100

Carbon instead of the topsheet — €75